Fracarro logo
High Level headends
Fracarro HEADLINE

 

!

SIG7901
!
sig7901
19" Sub-Rack voor 11 Modules inclusief de SIG7900 Module voor stroomverdeling en databus verdeling.

Mains voltage Vac, Hz 220-240, 50-60, class II
Power consumption W max 2 (stand alone) 100 (with all the modules connected)
Operating temperature °C -5 to +45
Back panel connections Mains voltage, RS485, address line
Compliant to EN50083-1, EN50083-2, EN60065

SIG7902
!
sig7902
19" Sub-Rack voor 6 Modules inclusief de SIG7900 Module voor stroomverdeling en databus verdeling.

Mains voltage Vac, Hz 220-240, 50-60, class II
Power consumption W max 2 (stand alone) 100 (with all the modules connected)
Operating temperature °C -5 to +45
Back panel connections Mains voltage, RS485, address line
Compliant to EN50083-1, EN50083-2, EN60065

SIG7282S
!
sig7282s

Audio video modulators, double conversion, double saw filter and tracking filter built in. One modulator covers the whole 47-862MHz bandwidth, very high C/N ratio in the band to allow the distribution of more than 80 channels.

• Fully agile output modulators, with double conversion, saw filter and tracking filter built in
  Using only one modulator, the whole 47-862MHz band can be covered, simplifying the
  installation and maintenance of the system
• High output level, 95dBuV, to mix all the channels together
• RCA (cinch) connectors for audio and video input, F connectors for RF output
• 70cm RCA cable and KPR41 solid bridge are included

SIG7310
!
sig7310

FREE TO AIR DVB-S Receiver
QPSK receiver with audio/video outputs on RCA (cinch) connectors to receiver free-to-air digital satellite programs. One input and one loop-through output for the connection of several receivers at the same SAT polarity.

• LNB supply, 14/18V 0/22KHz, DiSEqC 1.0
• Software download possible at the installation site
• KPR41 solid bridge is included in the packaging.

SIG7320
!
sig7320

QPSK receiver with Common Interface to receive free-to-air or encrypted digital satellite programs available on audio/video outputs with RCA (cinch)connectors.
Loop-through output for the connection of several receivers at the same SAT polarity.

• CI slot available to decode the encrypted programs. Compatible with more than 150 existing CAM
• Guaranteed compatibility with future CAM’s by software update
•It can generate 14 or 18 V, 22 KHz tone and DiSEqC 1.0, suitable to feed LNB or to control multiswitch output
• Loop through input for the connection of several receivers at the same SAT polarity
• Programmable via software FHM
• Housing for professional installations in 19” racks

SIG7530
!
sig7530

COFDM receiver with audio/video outputs on RCA (cinch) connectors to receiver free-to-air digital terrestrial programs. One input and one loopthrough output to connect several receivers to the same antenna.

COFDM input
Input frequency 174-230MHz + 470-862MHz - Input level 35-80dBuV - Input return loss 8dB typ. - Bandwidth 7MHz / 8MHz
Input frequency step 166.7KHz - AFC ±285KHz (2K) ±142KHz (8K)
Loop-through loss -2 to 3dB - Number of carriers 2K, 8K - Modulation QPSK, 16QAM, 64QAM
Hierarchy High priority Low priority
Guard interval ¼, 1/8, 1/16, 1/32 - FEC ½, 2/3, ¾, 5/6, 7/8, auto - Demodulation ETS 300744 - Mpeg2 Main level @ Main profile
Video output
Colour system PAL, SECAM, NTSC - Video type Composite - Video format Normal, letter box, pan scan, wide
Output video level 1Vpp – 75Ω on RCA connector - S/N unweighted >65dB
Audio output
Audio format Mono/Stereo/Dual sound - Max. audio level 600mV rms
Impedence 600 Ohm - Frequency band 20-15,000Hz
General
Mains 220-240Vac, 50-60Hz by means of SIG7901 or SIG7902 - Operating temperature -10 to +45 ºC
Dimensions (rack version) 3.55 (7e) x 13.33 (3U) x 24cm - Consumption 5W
Compliant EN60065: 2004-06, EN50083-2: 2002-05

SIG7905
!
sig7905

Module for local and remote connectivity of the professional Headline headends via Ethernet (LAN or WAN) and GSM. Fracarro Headend Management (FHM)

software allows to update remotely the headend devices’ firmware.

Firmware can be upgraded (both for SIG7905 and for the other modules) also by means of USB pen drive.

Mass memory SD slot (SD card not supplied) - Connection to external peripheral units RS-232 serial port

Connection to the Ethernet network Ethernet RJ-45 - Connection to pen drive USB 1 (200mA), USB2 (400mA)

Digital video input RJ-45 10-pole connector - Front key to change status (temporary suspension of the Controller Host

– Master/Slave activities) - Key to change status

General

Mains 220-240Vac, 50-60Hz - Dimensions (rack version) 3.55 (7e) x 13.33 (3U) x 24cm - Consumption 4W

Operatine temperature -10 to +45‹C - Compliant to EN50083-2, EN60065

TPE
!
tpe

Programming unit with numeric keypad and graphic display.
Enables the programming of all modules in the Headline range.

• Compatible with all K-series modules
  (emulates the KTP for original modules)
• Compatible with all headline modules
• USB drivers available for PC connection
• USB rate: from 9,600 to 115,200bit/s
• RS485 rate: from 9,600 to 115,200bit/s
• UART rate: from 9,600 to 115,200bit/s. TTL level (0-5V)
• Menu language available: Italian, English, German, French, Spanish and Portuguese
• Max addressable modules: 253
• Copy function available, to copy the settings from one device to another
• Adjustable contrast (31 steps)

SIG7904
!
sig7904
Afdekplaat 3U 1 slot
Deze afdekplaat wordt gebruikt met de SIG7901 en SIG7902 cabinets

Wij kunnen uw Headend systeem Plug and Play aanbieden op basis van de gewenst kanalenlijst.

!
Headend van Fracarro
Vraag onze voorwaarden
Van de kleinste 8 kanalen headend tot de meest complexe Units kunnen wij voor U kant en klaar aanleveren.
Alles op op maat en naar wens van uw klant. U hoeft slechts de kast op zijn plaats te zetten, aansluiten op het kabelsysteem en stroom erop.